Seed and plant spacing calculator (plants per bed)
How many plants fit in your garden bed and how many seeds to buy: enter the bed size in metres or feet, choose rows, a square grid or a triangular grid, and add germination rate and seeds per hole.
Result
| Plants that fit | 26 |
|---|---|
| Seeds needed | 62 |
| Bed area | 2 m² (21.5 ft²) |
Approximate: it ignores bed edges and paths, and germination rates vary by seed batch and age. Check the spacing on the seed packet.
How the number of plants is worked out
Each plant gets its own patch of ground: in-row spacing × row spacing for rows, spacing² for a square grid, and spacing² × 0.866 for a triangular (offset) grid, which fits about 15 % more plants. The bed area divided by that patch, rounded down, is the plant count. Seeds are plants × seeds per hole ÷ germination rate, rounded up. It ignores edge effects, so the real number can be a little different.
How to use it
- Choose the Units: metric (m, cm) or imperial (ft, in).
- Under "Bed size as" pick Length × width and enter both, or pick Area if you already know the square metres or square feet.
- Pick the Layout: Rows, Square grid or Triangular grid. Rows asks for the spacing between plants in the row and the spacing between rows; the other two ask for one spacing.
- Enter the Germination rate from the seed packet, as a percentage, and the Seeds sown per hole.
- Read Plants that fit, Seeds needed and the bed area in both unit systems.
Worked example
A bed 2 m long and 1 m wide, planted in rows with 25 cm between plants and 30 cm between rows. Each plant needs 25 × 30 = 750 cm², and the bed is 20,000 cm², so 26 plants fit (26.7 rounded down). With 2 seeds per hole and 85 % germination you need 26 × 2 ÷ 0.85 = 61.2, rounded up to 62 seeds. Switch the same bed to a square grid at 30 cm and 22 plants fit; a triangular grid at 30 cm fits 25. For a 4 × 8 ft bed with a square grid at 12 in, 32 plants fit, and 2 seeds per hole at 90 % germination means 72 seeds.
Frequently asked questions
How many plants fit in a 4 × 8 ft raised bed?
It depends on the spacing. At 12 inches on a square grid, a 4 × 8 ft bed holds 32 plants. At 6 inches it holds four times as many, 128. Always use the spacing for the crop: the packet or plant label gives it, and it differs hugely between a radish and a tomato.
What is the difference between rows, square and triangular layouts?
Rows use two spacings, between plants in the row and between rows, as in most vegetable gardens. A square grid uses one spacing both ways. A triangular grid offsets every second row, so each plant gets a hexagon of space, spacing² × 0.866, and about 15 % more plants fit at the same spacing. It suits crops like lettuce and onions.
How do I work out how many seeds to buy?
Multiply the number of plants by the seeds you sow per hole, then divide by the germination rate (as a fraction) and round up. For 26 plants, 2 seeds per hole and 85 % germination that is 62 seeds. Old seed germinates worse, so use a lower rate for last year's packet, or sow an extra hole or two.
Where do I find the germination rate?
Many seed packets print it, often with a test date, and a figure of 80 to 90 % is common for vegetable seed. If there is none, test it: put 10 seeds on a damp paper towel in a bag, wait the time the packet gives, and count how many sprout. Seven out of ten means 70 %.
Why does the real garden hold a different number?
The tool divides the whole area by the space per plant, so it ignores bed edges, paths and the half spacing many gardeners leave at the border. In a narrow bed this can overstate the count by a plant or two per row. It also assumes the spacing you enter is right for the crop, so check the seed packet.
Everything is calculated in your browser: this site doesn't send what you type anywhere.