Brine ratio calculator (salt for fermenting and pickling)
How much salt for a brine or for dry-salting vegetables: pick 2 %, 3.5 %, 5 % or your own percentage, enter the water in ml, litres, cups or quarts (or the vegetable weight), and get grams, ounces and approximate teaspoons of table or coarse kosher salt.
Result
| Salt | 35 g (1.23 oz) |
|---|---|
| Fine table salt | ~5.8 tsp (1.9 tbsp) |
| Coarse kosher salt | ~8.8 tsp (2.9 tbsp) |
Spoon amounts are approximate: salt brands differ in grain size and weight per spoon. Use a kitchen scale for reliable results, and non-iodised salt for fermenting.
How the salt amount is worked out
A brine percentage is the salt weight as a share of the water weight, and one millilitre of water weighs one gram, so a litre at 3.5 % needs 35 g of salt. For dry salting (sauerkraut, kimchi), the salt is the chosen percentage of the vegetable weight, often about 2 %. Spoon measures depend on the salt: fine table salt is about 6 g per teaspoon and coarse kosher salt about 4 g, but brands vary, so weighing is always more accurate.
How to use it
- Under Method choose Brine (salt and water) for liquid brines, or Dry salt for sauerkraut, kimchi and other vegetables salted directly.
- In brine mode enter the Amount of water and its Unit (ml, litres, cups or quarts). In dry mode enter the Weight of vegetables in g, kg, oz or lb.
- Pick the strength: a preset of 2 %, 3.5 % or 5 %, or a Custom percentage. In brine mode it is salt as a percentage of the water weight; in dry mode it is a percentage of the vegetable weight.
- Read the Result: salt in grams and ounces, plus spoon equivalents for fine table salt and coarse kosher salt. Use the gram figure whenever you have a scale.
Worked example
For 1 litre of water at 3.5 %, one millilitre of water weighs one gram, so you need 1,000 x 3.5 / 100 = 35 g of salt. That is about 5.83 teaspoons of fine table salt (6 g per teaspoon) or 8.75 teaspoons of coarse kosher salt (4 g per teaspoon). For dry salting 1 kg of shredded cabbage at 2 %, you need 20 g of salt, about 3.33 teaspoons of table salt. 2 quarts of water at 5 % needs 94.6 g of salt.
Frequently asked questions
What brine percentage should I use?
It depends on what you are making. The presets are 2 % for a light brine, 3.5 % for a medium one, close to the saltiness of seawater, and 5 % for a strong one. Always follow a tested recipe for the specific food and method. Stronger brines slow fermentation more and make the food saltier.
Is the percentage of the water or of everything?
In this tool brine strength is salt as a percentage of the water weight, not of the whole mix. So 3.5 % means 35 g of salt in 1 litre of water. Some recipes quote the total weight of salt plus water, which gives a slightly different salt amount, so check which one yours means.
Why weigh salt instead of using spoons?
Salt varies a lot by grain size: a level teaspoon is about 6 g for fine table salt and about 4 g for coarse kosher salt, and brands differ. Swapping one salt for another by volume can change a recipe a lot. A kitchen scale removes the guesswork, which is why the grams are shown first.
Which salt is best for fermenting?
Use plain non-iodised salt without anti-caking additives, such as pickling, sea or kosher salt, because additives can cloud the brine and iodine may affect the ferment. Whatever you pick, weigh it so the percentage is right, since grain size changes the volume.
How much salt for sauerkraut and kimchi?
A common starting point for sauerkraut is about 2 % of the vegetable weight, so 20 g per kilo, which is the preset here. Weigh the cabbage after trimming. Keep vegetables below the liquid while they ferment, and follow a tested recipe for food safety, since this tool only does the salt arithmetic.
Everything is calculated in your browser: this site doesn't send what you type anywhere.