Skip to contentHydramill Tools

Homebrew ABV calculator (alcohol from original and final gravity)

Work out the alcohol by volume of homemade beer, wine or cider from the original and final gravity in SG, Plato or Brix, with the standard and high-gravity formulas, apparent attenuation and approximate calories per 330 ml or 12 oz.

Gravity unit

Result

ABV, standard formula5.25 %
ABV, high-gravity formula5.34 %
Apparent attenuation80.0 %
Calories per 330 ml~153 kcal
Calories per 12 oz (355 ml)~164 kcal

Approximate and for home use only, not for labelling. A refractometer reading taken after fermentation is distorted by alcohol, so measure the final gravity with a hydrometer in SG when you can.

How the ABV is worked out

The standard formula is ABV = (OG − FG) × 131.25, so 1.050 down to 1.010 is 5.25 %. For strong brews the alternate formula, 76.08 × (OG − FG) / (1.775 − OG) × FG / 0.794, is closer. Apparent attenuation is the share of the gravity points that fermented, (OG − FG) / (OG − 1). Plato and Brix are converted to SG with a standard approximation, and calories come from the Daniels formula, so treat all of them as estimates.

How to use it

  1. Choose the Gravity unit that matches your instrument: Specific gravity (SG) for a hydrometer, Plato or Brix if you read in those scales.
  2. Enter the Original gravity (OG), measured before fermentation starts, for example 1.050.
  3. Enter the Final gravity (FG), measured when fermentation has finished and the reading is stable for a couple of days, for example 1.010. FG cannot be higher than OG.
  4. Read the Result: ABV with the standard formula and the high-gravity formula, apparent attenuation, calories per 330 ml and per 12 oz, and OG and FG converted to SG.

Worked example

A beer with an OG of 1.050 and an FG of 1.010 has (1.050 - 1.010) x 131.25 = 5.25 % ABV by the standard formula. The high-gravity formula gives 5.34 %, and the apparent attenuation is 80 %, so 80 % of the gravity points fermented. Calories come out at about 164 kcal per 12 oz serving and 153 kcal per 330 ml. A strong brew from 1.100 down to 1.020 gives 10.5 % by the standard formula, where the high-gravity formula is the better guide.

Frequently asked questions

How do I measure OG and FG?

Fill a test jar with a sample of cooled wort, float a hydrometer in it, and read the number at the surface level. Take the OG before you add the yeast and the FG after fermentation. Correct for temperature if your hydrometer is calibrated at a specific temperature, usually printed on it.

When is fermentation finished?

When the gravity stops falling. Measure on two or three consecutive days and use the FG when the reading no longer changes. Bottling or kegging too early can leave sugar for the yeast to ferment in the bottle, which risks over-carbonation.

Which ABV formula should I trust?

For most beers up to about 6-7 % the standard formula is close enough. For stronger brews it underestimates, and the alternate formula, which depends on both OG and FG, is the better estimate. Both are estimates. Differences between them tend to grow with the strength of the brew.

Why is my refractometer FG wrong?

Alcohol changes how light bends, so a Brix or Plato reading taken after fermentation does not reflect real sugar content without a correction. This tool does not apply one, so use a hydrometer in SG for the final gravity whenever you can. A refractometer is fine for the OG.

Can I put this ABV on a label?

No. These are home estimates, not lab measurements, and the calorie figures use an approximate formula. They are fine for tracking your own batches and comparing recipes, but not for commercial labelling or sale, where a calibrated lab measurement is required.

Everything is calculated in your browser: this site doesn't send what you type anywhere.