Skip to contentHydramill Tools

Knitting & crochet gauge calculator

Measure your swatch to get stitches and rows per 10 cm and per 4 in, convert a pattern to your gauge, and work out the cast-on for a target width, even with a stitch multiple.

1. Gauge from a swatch

Swatch measured in
Stitches per 10 cm22
Rows per 10 cm30
Stitches per 4 in22.4
Rows per 4 in30.5

2. Convert a pattern to your gauge

Enter both gauges over the same length (for example 10 cm or 4 in). Size fields are optional.

Stitches to use110 (110)
Rows to use150 (150)

3. Cast-on for a target width

Uses the swatch above. Leave the multiple at 0 for no rounding; 'multiple of 4 + 2' means multiple 4, extra 2.

Cast on110
Exact count110
Width with this count50 cm

How gauge works

Gauge is how many stitches and rows fit in a set length, usually 10 cm or 4 in. Measure a washed, relaxed swatch of at least 10 cm and divide: 22 stitches over 10 cm is 2.2 per cm, or 22.4 per 4 in (1 in = 2.54 cm). Rows are counted the same way and are almost never equal to stitches.

To follow a pattern with a different gauge, multiply its counts by your gauge divided by the pattern gauge: 100 stitches at 20 stitches per length become 110 at 22. Knit unchanged, the piece comes out pattern size x pattern gauge / your gauge, here 50 cm becomes 45.5 cm. For a cast-on the tool picks the nearest count of the form multiple x k + extra (ties round up), so a pattern asking for 'a multiple of 4 + 2' still works.

How to use it

  1. Section 1: knit a swatch, then under "Swatch measured in" pick centimetres or inches and enter Stitches counted over a given width and Rows counted over a given height. You get stitches and rows per 10 cm and per 4 in.
  2. Section 2: enter the pattern's stitches and rows per length and your own, both counted over the same length (10 cm or 4 in). Add the Stitches and Rows in the pattern to get the counts for your gauge.
  3. Fill in the optional pattern width or height to see how big the piece would turn out if you knit the original numbers unchanged, plus the percentage difference.
  4. Section 3: type a Target width, and the Stitch multiple and extra stitches if the pattern asks for "a multiple of 4 + 2". The tool returns the nearest valid cast-on, the exact count and the real width it gives.

Worked example

Your swatch has 22 stitches and 30 rows over 10 x 10 cm, so your gauge is 22 stitches and 30 rows per 10 cm (22.35 and 30.48 per 4 in). The pattern is written for 20 stitches and 28 rows per 10 cm and asks for 100 stitches, 140 rows and a width of 50 cm. At your gauge you need 110 stitches and 150 rows; knitted unchanged the piece would be 45.45 cm wide, about 91 % of the pattern. For a 48 cm cast-on at 22 stitches per 10 cm the exact count is 105.6, and with "multiple of 4 + 2" the tool gives 106 stitches, 48.18 cm wide.

Frequently asked questions

How big should a gauge swatch be?

Make it larger than the area you measure, because the edge stitches pull in and distort. A swatch of around 15 cm (6 in) square lets you count a clean 10 cm in the middle. Knit it in the same stitch pattern, yarn and needles as the project, and measure after washing and drying as you will treat the finished piece.

What do I do if my gauge does not match the pattern?

Change needle or hook size, not the pattern numbers. Too many stitches per 10 cm means your fabric is tight, so go up a size; too few means loose, so go down. If you cannot get both stitches and rows right, match the stitch gauge, since width is harder to fix, and use the row-conversion here.

Why does row gauge matter as well as stitch gauge?

Stitch gauge sets width and row gauge sets length. A pattern that says "work 40 cm" is safe, but one that says "work 90 rows" gives a different length if your rows are taller or shorter. Convert row counts with the Rows fields here, or switch to measured lengths.

Is this the same for crochet?

Yes. Gauge is just stitches and rows over a set length, so the same swatch method and the same conversion work for crochet. Count the stitches across and rows up on a worked square and enter them exactly as you would for knitting.

What does "a multiple of 4 + 2" mean?

The stitch pattern repeats every 4 stitches and needs 2 extra, for example edge stitches, so valid counts are 6, 10, 14 and so on. Enter 4 as the multiple and 2 as the extra, and the tool picks the nearest valid number to your target width, rounding up on a tie.

Everything is calculated in your browser: this site doesn't send what you type anywhere.