Skip to contentHydramill Tools

Bike gear calculator: ratios, gear inches and speed

Enter chainrings, cassette and tyre size to get gear ratio, gear inches, metres of development and speed at your cadence in km/h and mph, with duplicate gears and big jumps marked.

Total range: 4.55x

Chainring 34T
CogStep to this cogRatioGear inchesDevelopment (m)km/hmph
11T-3.0982.76.6035.722.2
13T+18.2 % (big jump)2.62 (duplicate)70.05.5930.218.7
15T+15.4 % (big jump)2.2760.74.8426.116.2
17T+13.3 %2.00 (duplicate)53.54.2723.114.3
19T+11.8 %1.7947.93.8220.612.8
21T+10.5 %1.6243.33.4618.711.6
23T+9.5 %1.48 (duplicate)39.63.1617.110.6
25T+8.7 %1.3636.42.9015.79.7
27T+8.0 %1.2633.72.6914.59.0
30T+11.1 %1.1330.32.4213.18.1
34T+13.3 %1.0026.82.1411.57.2
Chainring 50T
CogStep to this cogRatioGear inchesDevelopment (m)km/hmph
11T-4.55121.79.7152.432.6
13T+18.2 % (big jump)3.85103.08.2244.427.6
15T+15.4 % (big jump)3.3389.27.1238.423.9
17T+13.3 %2.9478.76.2833.921.1
19T+11.8 %2.63 (duplicate)70.45.6230.418.9
21T+10.5 %2.3863.75.0927.517.1
23T+9.5 %2.1758.24.6425.115.6
25T+8.7 %2.00 (duplicate)53.54.2723.114.3
27T+8.0 %1.8549.63.9621.413.3
30T+11.1 %1.6744.63.5619.211.9
34T+13.3 %1.47 (duplicate)39.43.1417.010.5

Duplicate: another chainring gives a ratio within 2 %. Big jump: step to the next cog above 15 %.

How gearing is calculated

The gear ratio is chainring teeth divided by cog teeth: 40 / 20 = 2 means two wheel turns per pedal turn. One pedal turn then moves the bike ratio x wheel circumference (the metres of development): 2 x 2.000 m = 4.00 m. Gear inches is the ratio times wheel diameter in inches (circumference / pi / 25.4). Speed is development x cadence x 60 / 1000 in km/h, so 4.00 m at 60 rpm is 14.4 km/h (8.9 mph).

Circumferences are typical rolled-out values; tyre, pressure and load change them by a few millimetres, so for exact speeds roll your own wheel one turn and enter it. Gain ratio (with crank length) is ratio x wheel radius / crank length and also compares bikes with different cranks. The step column is the ratio change to the next larger cog: above 15 % it is flagged as a big jump. A gear is a duplicate when another chainring gives a ratio within 2 %, as with 34/17 and 50/25. Preset cassettes are typical tooth counts, so check the markings on yours.

How to use it

  1. Enter the Chainring teeth, one to three numbers separated by a slash, comma or space, for example 50/34. Then choose a Cassette preset such as 11-34 (11 speed), or pick Custom and type the Cog teeth from smallest to largest.
  2. Pick your Wheel and tyre (700x25c, 29 x 2.3 and so on) to set the Rolling circumference. If you know the real value, choose a custom circumference between 500 and 3500 mm; it is the most accurate way to get true speeds.
  3. Set your Cadence in rpm, and optionally the Crank length in mm to add the gain ratio.
  4. Read the table: for every chainring and cog you get the ratio, gear inches, development in metres and speed. The Step column flags big jumps and duplicates are marked, and the Total range sums up the whole gearing.

Worked example

Take a 50/34 crankset, an 11-34 11-speed cassette (11, 13, 15, 17, 19, 21, 23, 25, 27, 30, 34), a 700x28c tyre (2136 mm), 90 rpm and 172.5 mm cranks. The hardest gear, 50/11, is a ratio of 4.545, 121.7 gear inches, 9.71 m per pedal turn and 52.4 km/h, with a gain ratio of 8.96. The easiest, 34/34, is a ratio of 1.00, 26.8 gear inches and 11.5 km/h at the same cadence. The total range is 4.55, and 50/25 is flagged as a duplicate of 34/17, since both are ratio 2.00. The 11 to 13 step is 18.2 %, a big jump.

Frequently asked questions

What is a gear ratio and what are gear inches?

The ratio is chainring teeth divided by cog teeth, so 50/25 is 2: two wheel turns per pedal turn. Gear inches multiplies that ratio by the wheel diameter in inches, giving the size of the equivalent penny-farthing wheel. A higher number is a harder gear, and it lets you compare bikes with different wheel sizes.

What is development in metres?

Development is the distance the bike rolls for one full pedal turn: the ratio times the wheel circumference. With a 2.136 m wheel, a 2.0 ratio gives 4.27 m. Multiply it by your cadence to get speed, which is how this tool shows km/h and mph.

Why does the tyre I choose change the numbers?

A bigger tyre has a longer circumference, so every gear rolls further per pedal turn. The presets are typical rolled-out values and real ones differ by a few millimetres with pressure, load and wear. For accurate speeds, mark the tyre, roll the bike one wheel turn in a straight line and enter that length.

What counts as a duplicate gear or a big jump?

A gear is a duplicate when another chainring gives a ratio within 2 %, as with 34/17 and 50/25. A step is a big jump when the next cog is more than 15 % bigger, which you feel as a sudden change in effort. Wide-range cassettes usually trade smaller steps for a larger total range.

What is the gain ratio?

The gain ratio, from Sheldon Brown, is the ratio times the wheel radius divided by the crank length. It folds crank length into the comparison, so it is useful when you compare bikes with different cranks. It only appears when you fill in the crank field.

Everything is calculated in your browser: this site doesn't send what you type anywhere.